From c9f0773562f50120fa82ade75c2851309f084bf3 Mon Sep 17 00:00:00 2001 From: JasonYANG17 <39414350+JasonYANG170@users.noreply.github.com> Date: Mon, 24 Jun 2024 02:17:18 +0800 Subject: [PATCH] =?UTF-8?q?Delete=20=E6=99=BA=E8=83=BD=E8=8A=82=E6=B0=B4?= =?UTF-8?q?=E8=8A=B1=E7=9B=86=20directory?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- 智能节水花盆/__vm/.智能节水花盆.vsarduino.h | 20 -- 智能节水花盆/__vm/Compile.vmps.xml | 37 ---- .../__vm/Configuration.Debug.vmps.xml | 9 - 智能节水花盆/src/arduino folders read me.txt | 14 -- 智能节水花盆/智能节水花盆.ino | 202 ------------------ 智能节水花盆/智能节水花盆.vcxproj | 128 ----------- 智能节水花盆/智能节水花盆.vcxproj.filters | 30 --- 7 files changed, 440 deletions(-) delete mode 100644 智能节水花盆/__vm/.智能节水花盆.vsarduino.h delete mode 100644 智能节水花盆/__vm/Compile.vmps.xml delete mode 100644 智能节水花盆/__vm/Configuration.Debug.vmps.xml delete mode 100644 智能节水花盆/src/arduino folders read me.txt delete mode 100644 智能节水花盆/智能节水花盆.ino delete mode 100644 智能节水花盆/智能节水花盆.vcxproj delete mode 100644 智能节水花盆/智能节水花盆.vcxproj.filters diff --git a/智能节水花盆/__vm/.智能节水花盆.vsarduino.h b/智能节水花盆/__vm/.智能节水花盆.vsarduino.h deleted file mode 100644 index 7322563..0000000 --- a/智能节水花盆/__vm/.智能节水花盆.vsarduino.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - Editor: https://www.visualmicro.com/ - This file is for intellisense purpose only. - Visual micro (and the arduino ide) ignore this code during compilation. This code is automatically maintained by visualmicro, manual changes to this file will be overwritten - The contents of the _vm sub folder can be deleted prior to publishing a project - All non-arduino files created by visual micro and all visual studio project or solution files can be freely deleted and are not required to compile a sketch (do not delete your own code!). - Note: debugger breakpoints are stored in '.sln' or '.asln' files, knowledge of last uploaded breakpoints is stored in the upload.vmps.xml file. Both files are required to continue a previous debug session without needing to compile and upload again - - Hardware: Arduino Uno WiFi (unowifi), Platform=avr, Package=arduino -*/ - -#if defined(_VMICRO_INTELLISENSE) - -#ifndef _VSARDUINO_H_ -#define _VSARDUINO_H_ -#include -#include -#include "..\智能节水花盆.ino" -#endif -#endif diff --git a/智能节水花盆/__vm/Compile.vmps.xml b/智能节水花盆/__vm/Compile.vmps.xml deleted file mode 100644 index 249a636..0000000 --- a/智能节水花盆/__vm/Compile.vmps.xml +++ /dev/null @@ -1,37 +0,0 @@ - - - - - - - - - - - - - 104 -105 display.println(" Wellcome To\n YANG\nIntelligent Flowerpot"); -106 display.display(); -107 delay(8000); -108 // display.begin(SSD1306_SWITCHCAPVCC, 0x3c); //初始化OLED并设置其IIC地址为 0x3C -109 } -110 --->111 void loop() { -112 // delay(2000); -113 -114 buttonState = digitalRead(buttonPin); -115 -116 Serial.println(analogRead(14));//湿度传感器接ESP32上的GPIO号 -117 delay(100); -118 if (buttonState == LOW) { // 判断是否按下开关 -119 display.clearDisplay(); //清屏 -120 delay(200); - - - - - - - - \ No newline at end of file diff --git a/智能节水花盆/__vm/Configuration.Debug.vmps.xml b/智能节水花盆/__vm/Configuration.Debug.vmps.xml deleted file mode 100644 index 3ccf3f3..0000000 --- a/智能节水花盆/__vm/Configuration.Debug.vmps.xml +++ /dev/null @@ -1,9 +0,0 @@ - - - - - - - - - \ No newline at end of file diff --git a/智能节水花盆/src/arduino folders read me.txt b/智能节水花盆/src/arduino folders read me.txt deleted file mode 100644 index 71714e3..0000000 --- a/智能节水花盆/src/arduino folders read me.txt +++ /dev/null @@ -1,14 +0,0 @@ -##################################################### - Arduino How To: Use sub folders for source code - http://www.visualmicro.com/ -##################################################### - -* .INO code can exist in the project folder and '\src' folder. -* .Cpp/.c/.S/.h etc. can exist in the project folder, the '\src' folder and in any folder(s) below the '\src' folder. -* .Cpp/.c/.S/.h sources in shared code projects should follow the same folder rules (because they are merged with the project sources into a temporary build folder prior to compile). - -* Use the 'Show All Files' icon above the 'Solution Explorer' to switch between 'included project files' and 'physical files/folders'. -* Source code in the project folder will always be compiled regardless of inclusion in the project. This functionality can be disabled in Global Options. - - - diff --git a/智能节水花盆/智能节水花盆.ino b/智能节水花盆/智能节水花盆.ino deleted file mode 100644 index a695bf5..0000000 --- a/智能节水花盆/智能节水花盆.ino +++ /dev/null @@ -1,202 +0,0 @@ -/* - Name: 智能节水花盆.ino - Created: 2023/3/15 0:22:26 - Author: JasonYANG17 -*/ -//导入配置库 -#include -#include -#include //驱动128x64 and 128x32 的屏幕显示的库 -#include //Arduino的图形库 -#include -#include -//配置屏幕像素 -#define SCREEN_WIDTH 128 // OLED display width, in pixels -#define SCREEN_HEIGHT 64 // OLED display height, in pixels -// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins) -//定义OLED恢复引脚，无则定义为-1 -#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin) -Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);//配置数据 -// Example testing sketch for various DHT humidity/temperature sensors -// Written by ladyada, public domain - -int M0 = 1024; //在空气中AO读取的值最大为1024，代表干燥时的读数 -int M1 = 0; //浸泡在水里的最小值 464（最小值会改变），代表100%湿度 -int PIN_AO = 14; //与wifi不冲突的pin -int in1 = 0; -int in2 = 2; -int LED = 15; -#include -#define DHTPIN 13//刚才插得2号引脚 -#define DHTTYPE DHT11//定义类型 -DHT dht(DHTPIN, DHTTYPE);//进行初始化设置 - -int buttonPin = 12; // 将开关连接到 -int buttonState = 0;//开关状态为0 -void setup() { - Serial.begin(9600); - dht.begin();//DHT开始工作 - pinMode(PIN_AO, INPUT); - pinMode(in1, OUTPUT); - pinMode(in2, OUTPUT); - pinMode(LED, OUTPUT); - digitalWrite(in1, LOW); - digitalWrite(in2, LOW); - digitalWrite(LED, LOW); - pinMode(buttonPin, INPUT_PULLUP); // 设置开关模式 - //Serial.println("OLED FeatherWing test"); //串口输出信息 - - display.begin(SSD1306_SWITCHCAPVCC, 0x3c); //初始化OLED并设置其IIC地址为 0x3C - display.clearDisplay(); //清屏 - delay(200); - - display.setTextSize(1.3);//设置文本大小 - display.setTextColor(SSD1306_WHITE);//设置字体颜色 - display.setCursor(0, 0); //设置光标的位置 - - //绘制像素点 - // display.drawPixel(64, 32, WHITE);//(x坐标，y坐标，颜色) - - //绘制水平线 - // display.drawFastHLine(64,32,64,SSD1306_WHITE);//(x起点，y起点，长度，颜色) - //绘制竖直线 - // display.drawFastVLine(64,10,50,SSD1306_WHITE); - - //绘制线 - // display.drawLine(0,0,128,64,SSD1306_WHITE);//（x起，y起，x终，y终） - - //绘制空心矩形 - // display.drawRect(0,0,128,64,SSD1306_WHITE);//(左上角x坐标，左上角y坐标，矩形长，矩形宽) - - //绘制实心矩形 - //display.fillRect(20,10,88,44,SSD1306_WHITE);//同上 - - //点亮全屏 - // display.fillScreen(SSD1306_WHITE); - - //绘制空心圆 - //display.drawCircle(64,32,32,SSD1306_WHITE);//(圆心x坐标，圆心y坐标，半径) - - //绘制实心圆 - //display.fillCircle(64,32,31,SSD1306_WHITE); - - //绘制空心三角形 - //display.drawTriangle(63,0, 0,63, 127,63, SSD1306_WHITE);//(第一顶点坐标[x,y]，第二，第三) - - //绘制实心三角形 - // display.fillTriangle(63,0, 0,63, 127,63, SSD1306_WHITE); - - //绘制空心圆角矩形 - //display.drawRoundRect(10,5,107, 43,8, SSD1306_WHITE);//(左上角x，左上角y，矩形长，矩形宽，矩形圆角半径) - - //实心圆角 - //display.fillRoundRect(10,5,107,53,3, SSD1306_WHITE); - - //绘制Bitmap图像 - //Bimap图像数据 - - - - - display.display(); - display.println(""); - display.println(""); - - display.println(" Wellcome To\n YANG\nIntelligent Flowerpot"); - display.display(); - delay(8000); - // display.begin(SSD1306_SWITCHCAPVCC, 0x3c); //初始化OLED并设置其IIC地址为 0x3C -} - -void loop() { - // delay(2000); - - buttonState = digitalRead(buttonPin);//读取开关通断模式，并导入至开关状态 - - Serial.println(analogRead(14));//湿度传感器接ESP32上的GPIO号 - delay(100); - if (buttonState == LOW) { // 判断是否按下开关 - display.clearDisplay(); //清屏 - delay(200); - - - display.setTextSize(1.3); - display.setTextColor(SSD1306_WHITE); - display.setCursor(0, 0); //设置光标的位置 - - // display.clearDisplay(); - //delay(8000); - - digitalWrite(in2, LOW); - digitalWrite(in1, LOW); - digitalWrite(LED, LOW); - - display.println("Hello, user!"); - display.println(""); - display.println("Enter Emergency\nBraking"); - display.println(""); - display.println("All programs have\nbeen closed for you"); - display.display(); - - // actually display all of the above - - delay(2000); - } - else { - - float h = dht.readHumidity();//读湿度 - float t = dht.readTemperature();//读湿度 - Serial.print("Humidity：");//湿度 - Serial.print(h); - Serial.println("%"); - Serial.print("Temperatrue：");//温度 - Serial.print(t); - Serial.println("C"); - display.clearDisplay(); - delay(200); - display.setTextSize(1.3); - display.setTextColor(SSD1306_WHITE); - display.setCursor(0, 0); //设置光标的位置 - float HUMI = ((M0 - analogRead(PIN_AO)) / ((M0 - M1) / 100)); //将湿度模拟量转换成数字量 - if (HUMI > 100.00) { - HUMI = 100; - } - if (HUMI > 80) { - digitalWrite(in2, LOW); - digitalWrite(in1, LOW); - digitalWrite(LED, LOW); - } - else { - digitalWrite(in2, LOW); - digitalWrite(in1, HIGH); - digitalWrite(LED, HIGH); - } - Serial.print("HUMI= "); - Serial.print(HUMI); - Serial.println("% "); - display.println("---------YANG--------"); - display.println(""); - display.print("Temperature: "); - display.print(t); - display.println("C"); - display.print("Humidity: ");//湿度 - display.print(h); - display.println("%"); - display.print("Soil Moisture: "); - display.println(HUMI); - if (HUMI > 80) { - display.println("Watter: OFF"); - display.println("Photosynthesis: OFF"); - } - else { - display.println("Watter: ON"); - display.println("Photosynthesis: ON"); - } - - display.println("---Have a nice DAY!--"); - //delay(1000); - display.display(); - - - } -} diff --git a/智能节水花盆/智能节水花盆.vcxproj b/智能节水花盆/智能节水花盆.vcxproj deleted file mode 100644 index 278db26..0000000 --- a/智能节水花盆/智能节水花盆.vcxproj +++ /dev/null @@ -1,128 +0,0 @@ - - - - - Debug - ARM - - - Release - ARM - - - Debug - ARM64 - - - Release - ARM64 - - - Debug - x86 - - - Release - x86 - - - Debug - x64 - - - Release - x64 - - - - {9c776b16-fbeb-40d4-a346-114384e760e3} - Linux - 智能节水花盆 - 智能节水花盆 - 15.0 - Linux - 1.0 - Generic - {D51BCBC9-82E9-4017-911E-C93873C4EA2B} - - - - - true - - - false - - - true - - - false - - - true - - - false - - - false - - - true - - - - - - c:\visualmicro\ignore - c:\visualmicro\pi-ignore - Arduino - - - - CppCode - true - - - - - - - - - - - - - - VisualMicroDebugger - - - $(ProjectDir)..\..\..\Arduino\libraries\GFX4d\src;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\libraries\SD\src;$(ProjectDir)..\..\..\Arduino\libraries\Arduino_Uno_WiFi_Dev_Ed_Library\src;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_SSD1306;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_GFX_Library;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_BusIO;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src;$(ProjectDir)..\..\..\Arduino\libraries\DHT_sensor_library;$(ProjectDir)..\..\..\..\..\..\\Users\\qw200\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\avr\\1.8.6\\cores\\arduino;$(ProjectDir)..\..\..\..\..\..\\Users\\qw200\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\avr\\1.8.6\\variants\\standard;$(ProjectDir)..\..\..\..\appdata\local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7\lib\gcc\avr\7.3.0\include;$(ProjectDir)..\..\..\..\appdata\local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7\lib\gcc\avr\7.3.0\include-fixed;$(ProjectDir)..\..\..\..\appdata\local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7\avr\include;$(ProjectDir)..\..\..\Arduino\libraries\GFX4d\src;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_SSD1306;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_GFX_Library;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src\utility;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src;$(ProjectDir)..\..\..\Arduino\libraries\DHT_sensor_library;$(ProjectDir)..\..\..\Arduino\libraries\Arduino_Uno_WiFi_Dev_Ed_Library\src - $(ProjectDir)..\..\..\..\..\..\\Users\\qw200\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7\bin\avr-g++ - $(ProjectDir)..\..\..\..\..\..\\Users\\qw200\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7\bin\avr-g++ - false - - - - $(ProjectDir)..\..\..\Arduino\libraries\GFX4d\src;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\libraries\SD\src;$(ProjectDir)..\..\..\Arduino\libraries\Arduino_Uno_WiFi_Dev_Ed_Library\src;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_SSD1306;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_GFX_Library;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_BusIO;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src;$(ProjectDir)..\..\..\Arduino\libraries\DHT_sensor_library;$(ProjectDir)..\..\..\..\..\..\\Users\\qw200\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\avr\\1.8.6\\cores\\arduino;$(ProjectDir)..\..\..\..\..\..\\Users\\qw200\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\avr\\1.8.6\\variants\\standard;$(ProjectDir)..\..\..\..\appdata\local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7\lib\gcc\avr\7.3.0\include;$(ProjectDir)..\..\..\..\appdata\local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7\lib\gcc\avr\7.3.0\include-fixed;$(ProjectDir)..\..\..\..\appdata\local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7\avr\include;$(ProjectDir)..\..\..\Arduino\libraries\GFX4d\src;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_SSD1306;$(ProjectDir)..\..\..\Arduino\libraries\Adafruit_GFX_Library;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src\utility;$(ProjectDir)..\..\..\..\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src;$(ProjectDir)..\..\..\Arduino\libraries\DHT_sensor_library;$(ProjectDir)..\..\..\Arduino\libraries\Arduino_Uno_WiFi_Dev_Ed_Library\src;%(AdditionalIncludeDirectories) - $(ProjectDir)..\..\..\..\..\..\\Users\\qw200\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7\bin\avr-g++ - gnu++11 - gnu11 - - - $(ProjectDir)..\..\..\..\..\..\program files\microsoft visual studio\2022\community\common7\ide\extensions\0axxbbxm.vxj\Micro Platforms\default\vm-intelli-pre.h;$(ProjectDir)..\..\..\..\AppData\Local\Temp\VMBuilds\智能节水花盆\unowifi\Debug\.vmintelli\aaf59a5be9d08a6e007ec97fcb20ad5a\vm-intelli-gcc-defines.h;$(ProjectDir)..\..\..\..\..\..\program files\microsoft visual studio\2022\community\common7\ide\extensions\0axxbbxm.vxj\Micro Platforms\default\vm-intelli-post.h;$(ProjectDir)__vm\.智能节水花盆.vsarduino.h;%(ForcedIncludeFiles) - true - true - _VMICRO_INTELLISENSE;__AVR_atmega328p__;__AVR_ATmega328P__;__AVR_ATmega328p__;_VMDEBUG=1;F_CPU=16000000L;ARDUINO=108010;ARDUINO_AVR_UNO_WIFI_DEV_ED;ARDUINO_ARCH_AVR;ESP_CH_UART;ESP_CH_UART_BR=19200;%(PreprocessorDefinitions) - - - - - - - - - - \ No newline at end of file diff --git a/智能节水花盆/智能节水花盆.vcxproj.filters b/智能节水花盆/智能节水花盆.vcxproj.filters deleted file mode 100644 index eb6d625..0000000 --- a/智能节水花盆/智能节水花盆.vcxproj.filters +++ /dev/null @@ -1,30 +0,0 @@ - - - - - {4FC737F1-C7A5-4376-A066-2A32D752A2FF} - cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx - - - {93995380-89BD-4b04-88EB-625FBE52EBFB} - h;hh;hpp;hxx;hm;inl;inc;xsd - - - {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} - xml;json;txt;rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms - - - - - Misc Files - - - - - - - - Header Files - - - \ No newline at end of file